---

DESCRIPTION:

A unique, oil-based formulation for staining wood floors. Penetrates the wood fibers, staining, sealing and enhancing the surface.

---

FEATURES:

• Available in 10 wood tones and white
• Only one coat is necessary to achieve true color
• Colors can be inter-mixed, offering an endless range
• Clean up with mineral spirits

---

RECOMMENDED USES:

• Apply only over bare wood
• Prepares the surface for a top coat of Bona Woodline Polyurethane or a Bona Waterborne Finish System

---

DIRECTIONS FOR USE:

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEETS #60350 (WOOD TONES) AND #60370 (WHITE) FOR THIS PRODUCT.

Use directly from container. Do not thin. Non-photochemically reactive (not an ozone precursor).

DIRECTIONS FOR USE: STIR WELL BEFORE USING!

Sanding and Finishing of Floors: 1. Sand floor using NOFMA-accepted methods. 2. For a stained floor, make your final cut with 80-grit paper and screen with 80-100-grit screen. 3. Vacuum thoroughly. 4. Tack with mineral spirits. 5. Apply stain, sealer and finish system (see directions).

Directions: 1. After proper preparation, apply BONAcommercial wood floors WOODLINE DS-STAIN with brush, lambswool applicator or cloth in the direction of the grain. 2. Allow 3-5 minutes for penetration. Remove excess by hand wiping or buffing. 3. Allow stain to dry thoroughly (minimum 8 hours under ideal conditions). Ventilation is important for improved drying conditions, especially during high humidity. Periods of high humidity and/or low temperatures will extend the drying time considerably. 4. Apply desired top coating (BONA WOODLINE POLYURETHANE or a BONA WATERBORNE FINISH SYSTEM) over thoroughly dried stain.

NOTE: BONAWOODLINE DS-STAIN is compatible with most interior stains and finishes. ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY.

Clean-Up: Clean application tools and equipment with mineral spirits.

Storage and Disposal: Keep container closed when not in use. Do not transfer contents to other containers for storage and disposal. Do not return used material to original container; reapply or dispose of. In case of spillage, absorb with inert material. Dispose of contaminated absorbent, container and/or unused contents in accordance with local, state and federal regulations.

DANGER: RAGS, STEEL WOOL OR WASTE SOAKED WITH BONA WOODLINE DS-STAIN MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED. IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A SEALED, WATER-FILLED, METAL CONTAINER.

---

SPECIFICATIONS/PHYSICAL DATA:

Physical Characteristics:
Ingredients - Wood tones: Polymerized oil binder(s), mineral spirits (solvent), pigments, driers
White: Mineral spirits (solvent), synthetic polymer binder, Titanium Dioxide, fillers, hydrocarbon solvent
Color - Wood tones: Neutral, Nutmeg, Spice, Antique, Medium Brown, Coffee, Golden, Rosewood, Mahogany, Ebony
Pastel: White
Odor - Mineral spirits
Clarity - Semi-transparent (Dry)
Storing Durability - 1 year shelf life
Solids - Wood tones: 63-64%, White: 48%
Density - Wood tones: 7.5 - 7.6 lbs./gallon (.90 - .91 S.G.), White: 8.7 lbs./gallon (1.04 S.G.)
VOC - Wood tones: Does not exceed 350 grams per liter (2.9 lbs. per gallon VOC)
White: Does not exceed 550 grams per liter (4.6 lbs. per gallon VOC)

Application Characteristics:
Drying Time - 8 hours minimum for wood tones, 72 hours minimum for White, under ideal conditions (65-75° F, 40-60% relative humidity).
Coverage - 600 - 800 square feet per gallon
Application Tools - Clean cloths, brush, lambswool applicator
Packaging - 1-quart cans (White), 1-gallon cans (White and wood tones)