An oil-modified, quick-dry, wood floor sealer.  Designed to penetrate and seal bare wood only.

• Penetrates and seals the wood
• Sands easily for use as a sanding sealer
• Fast drying - 1 1/2 - 2 hours
• Clean-up with mineral spirits
• Meets ASTM 1640 for quick dry sealers

• Formulated for use under Woodline Polyurethane finishes and Bona Waterborne finishes

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET #90005 FOR THIS PRODUCT.

NOTE: Most finishes will adhere to WOODLINE 1101 QUICK DRY SEALER after proper preparation and dry times. ALWAYS PREPARE A SAMPLE OR TEST AREA TO DETERMINE COMPATIBILITY.

PREPARATION:

Sanding and Finishing of Floors: 1. Sand floors using NOFMA-accepted methods. 2. WOODLINE 1101 QUICK DRY SEALER should only be used on unsealed, natural floors. Make your final cut with a 80-grit paper and screen with 80-100- grit screen. 3. Vacuum thoroughly. 4. Tack with mineral spirits. 5. Apply sealer and finish system (see directions).

Application: STIR WELL BEFORE USING! 1. After preparing surface, apply WOODLINE 1101 QUICK DRY SEALER at 600-700 sq. ft. per gallon with a brush or lambswool applicator and allow to penetrate 2-3 minutes. 2. TO ENSURE PROPER ADHESION OF THE FINISH COAT, ALL EXCESS MUST BE COMPLETELY WIPED OFF. 3. Allow surface to thoroughly dry (1 1/2 - 2 hours). 4. Abrade surface with a used 120-grit screen before finishing. Note: If application and coverage instructions are followed properly, a Bona Conditioning Pad maybe used to thoroughly abrade surface. 5. Vacuum thoroughly and tack with mineral spirits. 6. Apply Woodline Polyurethane or a Bona Waterborne finish.

Clean-Up: Clean application tools and equipment with mineral spirits.

Storage and Disposal: Keep container closed when not in use. Do not transfer contents to other containers for storage and disposal. Do not return used material into original container; reapply or dispose. In case of spillage. absorb with inert material. Dispose of contaminated absorbent. container and/or unused contents in accordance with local. state and federal regulations. To avoid spontaneous combustion during temporary storage. immediately soak soiled rags, sanding dust and waste in a water-filled, closed metal container.

DANGER: RAGS, STEEL WOOL OR WASTE SOAKED WITH BONA WOODLINE 1101 QUICK DRY SEALER MAY SPONTANEOUSLY CATCH FIRE IF IMPROPERLY DISCARDED. IMMEDIATELY AFTER EACH USE, PLACE RAGS, STEEL WOOL OR WASTE IN A SEALED, WATER-FILLED METAL CONTAINER.

Ingredients - Alkyd resins, solvents
Color - Light yellow
Odor - Mineral spirits
Clarity - Transparent
Solids - 30%
pH - N/A
Viscosity - (#4 Ford cup @ 25° C) 16.5 - 17.5 seconds
Flash Point - 104° F
Density - 6.96 lbs./gallon (.835 S.G.)
Stability - 1 year shelf life
Leveling - Excellent
Defoaming - Excellent/complete
Drying Time - 1 1/2 - 2 hours
Curing Time - 80% after 24 hours. 100% cured in approximately 1 week
Gloss Level - N/A
Coverage - 600-700 square feet per gallon
VOC - 585 grams per liter (4.9 Ibs. per gallon)
Application Tools - Lambswool, brush, applicator, clean cloth

• 1 gallon cans