A waterborne, environmentally responsible cleaner specifically formulated for use in the preparation of old wood sport floors, or for periodic maintenance to clean all polyurethane finished wood floors without leaving any residue. Pacific Sport Clean is a concentrate, to be diluted with water according to directions.

---

FEATURES:

• Formulated for use with Bona Sport™ waterborne or oil–modified finishes, and other waterborne or oil–modified urethane and maintenance coatings.
• For deep cleaning and periodic maintenance
• For spot cleaning of food spills and other stains
• Leaves no oily or waxy residue
• pH neutral
• Nonflammable

---

RECOMMENDED USES:

• Basketball courts
• Volleyball courts
• Racquetball courts
• Squash courts
• Badminton courts
• Multi-purpose gym and stage floors
• Aerobic and dance floors

---

DIRECTIONS FOR USE:

Before using, read all directions and material safety date shet #50020 for this product.
SHAKE WELL BEFORE USING.
IMPORTANT! NEVER POUR THE CLEANER DIRECTLY ONTO THE FLOOR.

For Daily Maintenance of Finished Floors:
1. Sweep or dust mop (with untreated mop only) daily to remove dust, grit or other abrasive particles. NOTE: Only use PACIFIC SPORT CLEAN CONCENTRATE diluted 1 part cleaner to 8 parts water for dampening the dust mop heads. DO NOT USE ANY DUST MOP TREATMENTS. Replace soiled mop covers as necessary. Continued use of soiled covers will cause streaking. 2. Damp wipe all spills or spots with SPORT CLEAN diluted at the 1 to 8 ratio.

For Periodic Maintenance of Finished Floors:
1. Dilute 1 part SPORT CLEAN CONCENTRATE to 8 parts water for a tacking solution. Tack with a well wrung-out cotton towel wrapped around a push broom. Be sure to clean towels regularly and change the solution as needed. 2. Shoe marks and scuffs can be removed by using a white pad and high-speed buffer with a (1:8) solution of SPORT CLEAN. Lightly mist the floor with the solution as you buff. Periodically clean or replace white pad. Continued use of soiled pads will cause streaking. 3. MAKE SURE ALL RESIDUE FROM THE WHITE PAD BUFFING/CLEANING PROCEDURE IS REMOVED FROM FLOOR SURFACE, BY IMMEDIATELY TACKING THE SURFACE WITH WATER-DAMPENED, WELL WRUNG-OUT COTTON TOWELS.

For Deep Cleaning and Abrading Prior to Recoating:
1. Dilute 1 part SPORT CLEAN CONCENTRATE to 5 parts water to be used as a spray buff solution with a white pad and high-speed buffer. 2. MAKE SURE ALL RESIDUE FROM THE WHITE PAD BUFFING/CLEANING PROCEDURE IS REMOVED FROM FLOOR SURFACE BY IMMEDIATELY TACKING THE SURFACE WITH WATER-DAMPENED, WELL WRUNG-OUT COTTON TOWELS. 3. Abrade the floor surface using a Bona Conditioning Pad and buffer. 4. BE SURE TO VACUUM OR SWEEP AND TACK THOROUGHLY WITH WATER-DAMPENED, WELL WRUNG-OUT COTTON TOWELS AFTER ABRADING. 5. Apply finish using a Bona Sport™ finish per label instructions.

Clean-Up: Clean all tools and equipment with water

---

SPECIFICATIONS/PHYSICAL DATA:

Physical Characteristics:
Ingredients - Surfactants, Dipropylene Glycol Monomethyl Ether, water and other proprietary ingredients
Color - Brilliant blue solution (wet)
Odor - Non-offending
Solids - 2%
pH - 7.0 - 7.5
Viscosity - (#4 Ford cup @ 25° C) 10 seconds
Flash Point - >200° F
Density - 8.42 lbs./gallon (1.01 S.G.)
Stability - 1 year shelf life
Leveling - N/A
Gloss Level - N/A
VOC - N/A

Application Characteristics:
Clarity - Negligible residue (dry)
Defoaming - N/A
Drying Time - 15-20 minutes
Application Tools - Varies with task; see label
Coverage - N/A
Percent Cured After 24 Hours - N/A
Maximum Cure - N/A